Megaman Starforce Armor – Done!

And here’s the armor to go with the helmet I posted Here!

MegamanGeoLit-web

This set is created mostly in EVA foam covered in stretch vinyl using the technique I outlined Here. Additional details were added in resin, PVC and there’s a couple dozen LEDs providing some light to Omega-Xi/WarRock. Th armor is lightweight, flexible an all joints bend and shift to allow for walking and posing.

Megaman Starforce – Helmet

I am very pleased to get to show this bad boy off.

MMHelm-Turnaround

This was a fun piece to work on, and will be the only hard part of my client’s Megaman costume. The helmet started as a large acrylic light dome. This was cut into the bases for the helmet (a word to those cutting acrylic with a rotary tool, wear long sleeves!). The visor section got a few thin coats of transparent red, and the rest of the helm was masked off and was colored with model magic and testors colors. The “ears” are slush cast in urethane resin. The “Hair” is assembled in EVA foam, which gives a cool cartoony look to it and holds the spikes perfectly without having to deal with a heavy wig and a ton of styling products. The visor also flips up for when my client needs more visibility. The inside is finished off with a foam lining for comfort

Technical Difficulties and Things on the Table

Just a quick note to anyone currently waiting on a quote request reply; My motherboard on my main computer died on Saturday morning, so I am going to be running my communications from my netbook until a replacement arrives. Unfortunately, the files I use for calculating quotes and long term scheduling are trapped on that computer, so I will be a few days late getting prop quotes out.

On a more pleasant note, I have some cool new progress to show, and drop the news on a really cool build on the table right now.

First, doing a piece from Fushigi Yuugi, Miaka’s priestess tiara, going for something between the Manga and Anime design, expect a full build on this one in the next two weeks:

 

And next, something I am very excited about, Loki’s spear from The Avengers!

Not much yet, but you’ll be seeing much more of this beastie. It’s a very cool build, and as a massive comic nerd myself, I’m glad to be working on something so in tune with my own obsessions. A shop copy will definitely be made later on.

 

 

 

 

Ed’s Automail Arm – Step by Step

 

By request, here’s the step by step process of how I made Ed’s Automail. There will be a few gaps in the photos, as I wasn’t doing the best job of chronicling this build. I’ll try my best to fill in the image gaps with adequate words.

Since there was no way to meet with my client and make a mold of his arm, I got several dozen measurements from my client and stitched a plush replica of his arm in muslin. I also made several paper mockups at this stage of major parts and mailed copies to my client to hold to the appropriate areas on his arm and hands and take photos so I could verify fit and scaling before moving to making the pieces in woderflex.

 

To make the end caps for the fingers, I coated a it of PVC pipe the same diameter as my client’s largest finger with bondo and began shaping the cap.

 

The pipe was cut off and the bottom sanded. You can see here how tiny my hands are compared to my client. I have very small hands, so the plush arm/hand double was vital to making this automail. After I sanded the piece carefully, it got several clearcoats and went under silicone. I then cast five copies using black tinted resin with Smooth On’s cast magic powder in Silver Bullet.

 

For certain areas, I wanted to use silver metallic stretch vinyl in order to minimize how much this automail would restrict my client’s movement. Here is the cold cast resin finger cap next to the vinyl, the finish really is very similar.

 

After getting the confirmation that my paper mockups were the correct size, I started the somewhat tedious process of cutting out all of the pieces. Each piece was numbered to keep them straight, I ultimately had to cut out two dozen pieces in Wonderflex and keep straight probably three dozen resin castings, so numbering was vital. Each Wonderflex piece was double thickness, one layer was just going to be way too flimsy. Once cut, the layered were joined with some mild heat from the heat gun. The folks over at The Engineer Guy are my favorite source for Wonderflex.

 

Once the pieces were layered, it was time to form them. I recruited pretty much every wine bottle, storage jar and tin can I could find to get the right curve forms, and even used my own thigh for the upper arm plates, as it turns out it was the perfect size (Shows how tiny I am that my thigh is the same thickness as an average man’s biceps). I used painters tape to keep the wonderflex in place while it cools. Wonderflex is a very useful material because, once you have applied heat, it remains pliable for about two minutes afterwards, meaning when you handle it, it’s no longer scalding hot. This is a huge advantage for anyone who has had to deal with heat forming styrene, which is only pliable while hot, lots of burned fingers!

 

Here is where I start having gaps in photos, as I got to the point where each piece was at a different stage in the process. Here we see the upper arm plates heat formed and hit with 2-3 coats of primer, which was then sanded. Wonderflex has a slightly pebbled surface on the presentation side, but a few coats of sandable primer usually handles the texture. Another trick for smoothing the surface is to use the back of a spoon  to burnish the surface while the Wonderflex is still pliable from heating.

 

You can also see the elbow piece and some of the cold cast resin pieces. They’ll be used to fill out all of the screws, studs, pivots, knuckle covers and any other little circle bit needed to embellish the finished piece. The elbow piece is also wonderflex, but has had additional buildup with Bondo to create the rounded  form.

 

I also ordered some colored plastic tubing and heat shielding to add in the armpit area to replicate thewiring and tubing. The large screw top there is actually a cast from the mold for my gold circles for my Lightning’s coat, with the notch scored in with the dremel.

 

Here I started assembling the hand plate and started working the finger sections. These are just stretch vinyl cylinders, since if I had cast these in resin or used Wonderflex, my client wouldn’t have been able to fully bend his fingers.

 

A glove will hold all of the pieces in place and hide the client’s skin. It’s sewn in basic black spandex. The paint I used for the silver is Valspar’s metallic silver. It’s not a chrome-like finish, but is far more durable than most of the high quality silver glosses I use, which I felt was very important since this piece would rub on itself and bits of the costume all day. Another advantage is that this paint has a much more forgiving humidity and temperature tolerance, which was an absolute lifesaver in southeast Georgia in June and July!

 

For the large forearm plate, I needed to thicken the wonderflex substantially. So, I cut a lower layer in wonderflex, then cut filler layers with the three dents cut out in EVA foam. This was easy to cut, lightweight and could hold up to the heat-forming of the wonderflex. The blue strips all-over the board are the notches I cut out. I then layers another layer of wonderflex over the base and foam, then pressed in the trenches so that the top layer of wonderflex bonded with the base layer, rounded the edges and flattened the outer form. This is the plate in an early form, after this would come a lot of extra filling and sanding.

 

The piece starting to come together! As you can see, some places required extra puttying and sanding, but on the whole the wonderflex didn’t require too much extra work.

 

Here’s a shot of the plate as I was puttying and sanding it, the pink is bondo, while the grey is Krylon sand-able primer. To get into the trenches I used a combination of sanding sponges, emery boards and standard sandpaper.

 

The hand was finished up with a sewn vinyl half glove. The T-shaped fastener is EVA foam covered in stretch vinyl, and I attached it with heavy duty thread sewing the T to the half glove. The stitches and knots are hidden nicely under the little resin studs. I also attached the finished arm plate to a strip of stretch vinyl for the underside of the forearm. The whole forearm closes with velcro hidden under the plate.

 

Here you can see the full arm underside, and the elbow attachment. The elbow also has a strip of stretch vinyl which will give more comfort when my client bends his elbow. The upper arm was also finished with a sewn vinyl cover.

 

The complete hand, the only hard parts are on the fingertips, back of the hand and the resin disk on the side of the thumb. This will give my client maximum use of his hand. I also took these final photos before realizing I had forgotten to add the studs to the arm plate, Whoops!! I made sure the studs were attached before it went to the client however.

 

For the shoulder area, I connected the major pivot points with a few real studs, then added all of the extra studs using my resin replicas. I also epoxied in the tubing and heat shielding. The spandex glove pulls all the way up over the shoulder and has a strap that wraps across the chest to keep everything in place.

 

This was a really interesting piece to work on. It used several materials I rarely get to use, but have always loved working with. I can’t guarantee it’ll help with your alchemy or survive a disagreement with your teacher, but at least you should look cool with it. Hopefully this rather messy write-up will help others hoping to tackle the project. I gotta say I have even more respect for Winry after making this!

Full Metal Alchemist – Ed’s Automail

Long time no see! The big con of the yea for me has finally wound down. I had several rush commissions leading up to the con, plus I help organize and direct some very large photoshoots at my home con, DragonCon, so I’ve been quite lax in updating here.

Today I have the shots of the completed automail from a commission a couple months ago.

The piece was created in a combination of double layered wonderflex, resin, stretch metallic vinyl, spadex and some random colored hoses and heat shielding.

Look forward to more posts of completed work to start trickling in! Just waiting for photos from my clients!

 

The Commission queue also now has slots again!